Geek Vape Ammit 22 MTL RDA

Regular price ₱1,999.00 Sale price ₱1,699.00
/
Shipping and sale/discounts calculated at checkout.


GeekVape presents the Ammit 22mm MTL RDA, a single coil Mouth-to-Lung RDA with a unique 3D air flow and a dual chambered top cap for a versatile vaping experience. The build deck sports a dual post, single terminal deck, with top mounted Phillips screws and a PEEK insulated positive post.

The Ammit's unique 3D airflow consists of a dual chambered top cap for heat dissipation and directing airflow from the air ports located on the top ring of the cap directly to the coil. The top cap has an adjustable ring with two different air ports; one 12mm wide air port that allows for more airflow, and 2mm air port on the other side of the ring for a tighter draw. These two types of air ports allow up to 12 different configurations.


The drip tip for the Ammit is threaded and must be screwed on to the drip tip base. The drip tip base has two o-rings allowing it to be easily removed for easily re-wetting the installed coils. The GeekVape Ammit 22mm MTL RDA has dual wicking ports that lead into a 9mm deep juice well that complements both bottom fed and drip builds. This package comes with three interchangeable drip tips: a 3mm Delrin Tip, a 2mm Delrin tip, and a 3mm Stainless Steel Tip. The Ammit has a recommended wattage range of 15 to 20W. The contact point for the Ammit is a standard gold plated 510 pin. The GeekVape Ammit is a beautifully designed MTL RDA for users looking for a tighter and unique vaping experience!

Features

  • 22mm Diameter
  • Two Post, Single Terminal Build Deck
    • PEEK Insulated Positive Post
    • Top Mounted Phillips Screws
  • Top to Bottom Adjustable 3D Air Flow
    • Directs Airflow from Top to Coil to Driptip
    • Dual-Chambered Top Cap for Airflow and Heat Dissapation
    • 12 Airflow Configurations
      • 12mm Notched Airflow Adjustment Ring
      • 2mm Narrow Air Port
  • Recommended Wattage of 15 to 20W
  • Dual Wicking Ports
    • 9mm Juice Well
  • Three Threaded MTL Drip Tips to Choose From
    • Short 3mm Diameter Delrin
    • Short 2mm Diameter Delrin
    • Tall 3mm Diameter Stainless Steel
  • Easy to Remove Drip Tip Base
  • Gold Plated 510 Threaded Contact Point

Inclusions

  • One Ammit 22mm MTL RDA
  • One 3mm Stainless Steel Drip Tip
  • One 2mm Drip Tip
  • One 3mm Drip Tip
  • One Allen Key
  • One Spare Parts Pack
  • One Flathead Screwdriver
  • Two Clapton Coils (0.7 ohm)
  • One User Manual

 

Clients often ask us, is ______ kit good?

The answer is simple: if we're carrying it, it's better than good. It’s great.

We wouldn't be carrying it if we didn't think so.

The tricky question is, will it be great for you?

To help you make the right personal choice, we suggest asking yourself the following questions, and we can guide you based on the answers.

Will I be using the kit mostly outside, or mostly at home?

If you'll be using your kit on your daily drive, or in a vaping area at work (by the way, if your workplace has a vaping area or has access to one, then congratulations), you'll want a kit that offers great battery life.


That means a minimum of 1500mAh for pods with coils well below 1.0ohm, or 550mAh for pods with coils at or above 1.0ohm, so you won't need to charge too often. If you'll be using the kit mostly at home, then any will work for you, BUT you should ask yourself next...

 

Will I be using just salts, just freebase, or alternating between both?


If you're a salts kind of guy/gal (and you should be, if you're trying to quit smoking, or have kept off stink sticks but are still craving for one, once in a while), look for a kit with a coil/pod resistance of 1.0ohm or higher, or at least gives you that option.

1.0ohm or higher coils will produce the smoothest, most flavorful vapor using salts, and you won't risk getting too hard a hit from too much vapor.

Now, if you're freebase-only, then you'll want a kit with a coil resistance much lower than 1.0ohm. We'd recommend 0.4 to 0.6ohm ourselves.

But, keep in mind that the battery capacity of your kit will need to be higher the lower the resistance of the coil. If you ask us, we'd look for no less than 1500mAh out of a kit that uses a coil/pod at 0.6ohm. At 0.4 ohm, 1500mAh is pushing it. The reason is simple: the lower the coil/pod resistance, the more electricity will flow through it as a function of time, and therefore the more power it'll consume during use (f$&@ that's actually more complicated than we want it to sound, but what can you do? Science).

Want our advice? Email or message anytime.