Vandy Vape Iconic RDA by Mike Vapes - Mistwood Vape Café
Vandy Vape Iconic RDA by Mike Vapes - Mistwood Vape Café
Vandy Vape Iconic RDA by Mike Vapes - Mistwood Vape Café
Vandy Vape Iconic RDA by Mike Vapes - Mistwood Vape Café
Vandy Vape Iconic RDA by Mike Vapes - Mistwood Vape Café

Vandy Vape Iconic RDA by Mike Vapes

Regular price ₱1,899.00
/
Shipping calculated at checkout.
4 in stock

Vandy Vape collaborates with reviewer Mike Vapes on the Iconic 24mm RDA, featuring a two post clamp style build deck, PEEK insulator, and 8mm deep E-Juice well. The two post clamp style build deck has a 1.5mm clamping space with top mounted Phillips screws, able to accommodate larger builds from the simple to the exotic.

The Iconic RDA has both side airflow and a bottom tubes airflow system; the bottom tubes airflow system allows for extra room in the juice well and prevents the risk of leaking. There are two tubes each side of the RDA and they are positioned so the airflow can flow underneath the coils. The side airflow system measures at 8.5mm by 1.5mm and allows additional airflow into the RDA.

Included with the Iconic RDA are three 810 drip tips: a 12mm bore resin drip tip (color and patterns randomized), an 18.5mm bore delrin doc drip tip, and an 18.5mm bore frosted doc drip tip, as well as a gold plated bottom feed pin. The Vandy Vape x Mike Vapes Iconic 24mm RDA is the another addition to the renowned Vandy Vape line of products!

Features

  • 24mm Diameter
  • Two Post Clamp Style Build Deck
    • 1.5mm Clamping Space
      • Top Mounted Phillips Screws
    • PEEK Insulator
    • 8mm Deep Juice Well
  • Side Airflow and Bottom Tubes Airflow System
    • Bottom Airflow Tubes
      • Allow Extra Room in Juice Well and Prevents Risk of Leaking
      • Positioned Under Coil
      • Two Per Side
    • Side Airflow System
      • 8.5mm by 1.5mm Each Airslot
  • Gold Plated 510 Contact
    • Squonk-Ready 510 Pin
  • 304 Stainless Steel
  • 810 Drip Tips
    • 12mm Bore Resin Drip Tip
    • 18.5mm Bore Delrin Doc Drip Tip
    • 18.5mm Bore Frosted Doc Drip Tip

     Inclusions

    • One Vandy Vape Iconic 24mm RDA
    • 12mm Bore Resin Drip Tip
    • 18.5mm Bore Delrin Doc Drip Tip
    • 18.5mm Bore Frosted Doc Drip Tip
    • One Mini Phillips Screwdriver
    • One Bottom Feed 510 Pin
    • Spare Part Pack
    • User Manual

     

    Clients often ask us, is ______ kit good?

    The answer is simple: if we're carrying the kit, it's better than good. It's great!

    We wouldn't be carrying it if we didn't think so based on our testing.

    The tricky question is, will it be great for you?

    To help you make the right personal choice, we suggest asking yourself the following questions, and we can guide you based on the answers.

    Will I be using the kit mostly outside, or mostly at home?

    If you'll be using your kit on your daily drive, or in a vaping area at work (by the way, if your workplace has a vaping area or has access to one, then congratulations!), you'll want a kit that offers great battery life.
    That means a minimum of 1500mAh capacity, so you won't need to charge too often. If you'll be using the kit mostly at home, then any will work for you, BUT you should ask yourself...

     

    Will I be using just salts, just freebase, or alternating between both?


    If you're a salts kind of guy/gal (and you should be, if you're trying to quit smoking, or have so far kept off the stinkies but are still craving for a stick once in a while), look for a kit with a coil/pod resistance of 1.0ohm or higher, or a kit that gives you the option.

    1.0ohm or higher coils will produce the smoothest, most flavorful vapor using salts, and you won't risk getting too hard a hit from too much vapor.

    Now, if you're freebase-only, then you'll want a kit with a coil/pod resistance much lower than 1.0ohm. We'd recommend 0.4 to 0.6ohm ourselves.

    But, keep in mind that the battery capacity of your kit will need to be higher the lower the resistance of the coil. If you ask us, we'd demand no less than 1500mAh out of a kit that uses a coil/pod at 0.6ohm. At 0.4 ohm, 1500mAh is pushing it. The reason is simple: the lower the coil/pod resistance, the more electricity will flow through it as a function of time, and therefore the more power it'll consume during use (fuck that's actually more complicated than we want it to sound, but what can you do. Science.).